Headphone support V2

18/05/2019 Version 2:

Version 2 has been improved for printing in the back; now the print should look more beautiful.

I added an empty space inside to add weight; in the previous version, heavy headphones tend to overturn everything. (fishing lead should be good)

I removed the screw holes; just add a thread of glue if it goes too slow.

The top part, I made a change to print better.

you should print without media; otherwise it will be difficult to eliminate supports inside.

--------------------------------------------------------------------------------------

Many people can not print with dimensions greater than 20x20 cm;

The makerbot headphone support when scaled for a 20x20cm flat printer is too small;

So I thought of creating the base in a similar way; just a plate of 16cm in size!
Also I added 2 holes for USB support.

You only need:

1x Aluminum/wood tube 10x1 or 10x2 (10mm outside diameter)

2x wood screws 4.5x15mm

Cut the tube at will; 25 - 3