Thingiverse
Headphones hanger
1
Downloads
0
Likes
0
Makes
A shelf-mounted headphones hanger.
The model is designed to be fitted on a 18mm thick shelf. If your shelf has different thickness, simply multiply the value in mm by 5.555 and you will get the percentage, by which you should scale the model. For example, if your shelf is 21mm, 21*5.555=116.5. Scale model to 116.5%, either whole or just vertically. If the fit is not snug, put a piece of paper inside the mount or put an M6 bolt through the nearest set of holes.
You will need to use supports to print it, but do not worry - the burrs that supports may leave will only make the grip better. Oh, and do NOT print it with Ninjaflex.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/cHKRiwS5oW7
The model is designed to be fitted on a 18mm thick shelf. If your shelf has different thickness, simply multiply the value in mm by 5.555 and you will get the percentage, by which you should scale the model. For example, if your shelf is 21mm, 21*5.555=116.5. Scale model to 116.5%, either whole or just vertically. If the fit is not snug, put a piece of paper inside the mount or put an M6 bolt through the nearest set of holes.
You will need to use supports to print it, but do not worry - the burrs that supports may leave will only make the grip better. Oh, and do NOT print it with Ninjaflex.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/cHKRiwS5oW7
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!