Heart Shaped Planter

There are two models, one is slightly angled at the top and one is flat. You can simply change the size and shape of the planter by changing X,Y, and Z dimensions in your slicer. 3D Printed models are not as watertight as one might think. There is a great post from Prusa on this topic. This being said, I designed this model to have enough walls and in my testing, it works great - especially when you add soil and a plant.Printing detailsUse either 100% infill or 8+ walls so there are no gapsLayer height from 0.1 to 0.45mm worked for meIf your print leaks water, try these tips taken from Prusa's blog postFor 0.4mm nozzles, use layer height of 0.15 or lowerYou can increase flow to 105-110%Increase print temperature by 5-10 degrees Special thanks to BigMikeMW for the thumbnail render, check him out! My Twitter :) In case you have any requests, feel free to send me a message and I will try to help you out!