Heart Spongy

Use version 009.
Import in mm. This is approximately 10cm across. Change the scale if you want.
Turn support material turned on.
I used 30° overhang threshhold and 0.5mm contact distance. You do NOT want a tight contact distance or you will never get to pick out all the little bits from inside the holes. I removed the support material with a brad awl and slim needle-nose pliers. It took me about an hour, but it was well worth it.

The picture is before processing. I trimmed the support material but I still want to texture the surface before I upload the final picture.

I had to do something creative for the season. (Sorry this was late so people probably won't have time to print this as gifts.) I grabbed Abaab's sphere and applied a linear lattice deformation, and a boolean operation to slice off the lower half. I added a "sternum" down the middle for extra support, and plate on the base that's designed to stick to the bed, such that won't curl up around the edge.

I had to ad