Hearth - HueForge

Project: hearthrew.hfpPrint at 100% infill with a layer height of 0.16mm with a base layer of 0.32mmThe Model is 200x174.57mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.2mm and the Actual Depth is 1.6mmFilaments Used: PLA BambuLab Basic Red Transmission Distance: 3.5 PLA PolyLite White Transmission Distance: 5This print uses 2 unique filamentsSwap Instructions: Start with Red At layer #6 (1.12mm) swap to White for the rest.