MakerWorld
Earrings
Model downloaden
Heartpulse Earrings
102
Downloads
94
Likes
58
Makes
A pair of earrings representing heart pulses.Bill of MaterialsYou will need:Earring hooksEye pins for earrings (0.6 mm diameter, 16 mm length)A very small amount of glue can be useful to ensure the eye pins stay firmly in place.InstructionsEach earring has a small hole at the top. Simply insert an eye pin through the hole, then attach the hook to the eye pin.If needed, you can apply a tiny drop of glue to the eye pin before inserting it to secure it more effectively.Printing recommandationsUse a 0.2 mm or 0.4 mm nozzle with the Arachne wall generator enabled in your slicer for the best results.Print on a smooth build plate (smooth PEI or similar).If you experience adhesion issues, make sure your build plate is thoroughly cleaned.DesignFont Awesome icons were used as the basis for the heart pulse.
Rauks publiceert ook op
35 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
