Heatbed leveling screw M3

This litle piece helps you leveling your heatbed much easier and accurate!

You need a simple M3 nut which fits perfekt insight the printed leveling bolt.

Easiest way to place the nut is to take an approx. 40mm M3 screw, place the nut in front and give it a slight punch with a hammer, whilst placing it insight the bolt.
Then remove the screw and your leveling screw is ready to use.

I was tired to brake my fingers with the original tiny wheels. The bigger levelingscrew is way much easier to handle and your headbed can be leveled more accurate.

BTW: I use a 0.4mm nozzel so I have to shimm it 0.2mm above the heatbed. Easy trick is to use a sheet of paper, fold it in the middle and place it between nozzel an heatbed. Thickness of a usuall paper is 0.10mm. So if you take it double it works out perfekt :-)