Heated Rivalry Hueforge

I have added a pause at layer 12 in case you dont have multiple AMS. You are allowed to print for personal or gift use. You can not print to sell. Happy printing! Project: Heated Rivalry.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 136x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #12 (1.04mm) swap to Red At layer #16 (1.36mm) swap to YellowBorder Only Colors from here until the end. At layer #19 (1.6mm) swap to Jade White for the rest.