Thingiverse
Animals
Go to Model
HedgeHog House
30
Downloads
35
Likes
1
Makes
Designed Slightly To big so I scaled it to 80% the original size
Print size is 12 inches by 6 inches
Actual house is 6 inches x 6 inches
Has small porch and a food and water bowl built in
my print was watertight
I did not use any supports other than the ones included in the door arch-way which should be removed after print
Printed with 10% infill Plenty strong
I think it took 12 hours for the main house to print
around 99,546 mm of filament at 347 layers used
PS: Printed 04-30-18
Will upload photos once my hedgehogs new cage is finished.
Good luck Please post pictures if you print one
Photos Added: 11-26-18
I had some cooling problems with the roof
Print size is 12 inches by 6 inches
Actual house is 6 inches x 6 inches
Has small porch and a food and water bowl built in
my print was watertight
I did not use any supports other than the ones included in the door arch-way which should be removed after print
Printed with 10% infill Plenty strong
I think it took 12 hours for the main house to print
around 99,546 mm of filament at 347 layers used
PS: Printed 04-30-18
Will upload photos once my hedgehogs new cage is finished.
Good luck Please post pictures if you print one
Photos Added: 11-26-18
I had some cooling problems with the roof
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
