HEIGAOLAPC Mini PC case and mount options

This is a case for the HEIGAOLAPC Mini PC I use for running the software needed for my cars standalone ECU… note it is specifically for the unit listed here…https://goleminipc.com/products/higole-gole-1-pro-mini-pc-windows-11-pro-intel-celeron-j4125-8gb-ram-256gb-rom?variant=44981325693208The profile contains both PLA and ASA settings.. note that I found the ASA material does have a tendency to shrink and I have tried to compensate for this when I drew it up but its a fine line between loose in PLA or tight in ASA so make sure your printer is calibrated ok…You can also add modifiers in the slicer if you need it a tighter or looser fit…Hardware required…Case assembly:4 x M2.5 brass thread inserts4 x M2.5x6 button head bolts If there are any issues with using heat inserts then I can make a version that would allow the bolts to screw straight into the plastic Backplates to case:4 x M4 nuts4 x M4x10 button head bolts Mounts to backplates:M4 nuts… typically at least 4 required but designed