Height Adjustable Command Strip Helmet Stand

This height adjustable wall mount helmet stand is uses Command Strips. Depending on your helmet type, the main support can be raised or lowered to suit your needs. I use the adjustment to align the full vs half mask helmets on the wall so they look level. The shroud hides the command strip nicely, and can be detached if you need to use the helmet via the three pins.I used a pipe reamer on the holes in the arm before attaching them together, you can also cut the pins out and glue it if that feels better for your needs. I also support the inside of the bracket when attaching the arm as it is pretty thin. I added a few extra domes, if you want to be fancy, but I made them to reduce the weight for a heavier helmet. Two Large size command strips fit in the back and away you go, place it anywhere, without leaving holes on your walls. I have had big and small helmets hang off this for a couple years and never had any problems. The screw has been split into 2 pieces to maximize strength at the