Hellboy - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Sunlu Black Transmission Distance: 0.6 PLA E-PLA add:north red Transmission Distance: 5 PLA E-PLA add:north Yellow Transmission Distance: 6 PLA Sunlu White Transmission Distance: 5 Swap Instructions: Start with Black At layer #7 (0.64mm) swap to red At layer #16 (1.36mm) swap to Yellow At layer #21 (1.76mm) swap to White for the rest.