Helldivers 2 Automatons Emblem

Project: AutotomsPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #9 (0.8mm) swap to Black At layer #10 (0.88mm) swap to White for the rest.Boost MeFor SWEET LIBERY!!!! please consider liking and Boosting this!