Helldivers II

Prints thin for picture frames. Project: helldivers2 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x112.5mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA BambuLab Black Transmission Distance: 0.3 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #20 (1.68mm) swap to Yellow for the rest.