Helldivers Stamp Out The Bot Hueforge

Project: helldivers stamp out the bot.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 3 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #14 (1.2mm) swap to Yellow for the rest.