Slicer Discord
Hello Kitty Dancing Hueforge – 3D-printbaar model van MakerWorld MakerWorld
2D Art

Hello Kitty Dancing Hueforge

39 Downloads
17 Likes
7 Makes
Model downloaden
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x254.02mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Matte Charcoal Black Transmission Distance: 0.3 PLA BambuLab Matte Scarlett Red Transmission Distance: 1.9 PLA BambuLab Glow Pink Transmission Distance: 5.1 PLA BambuLab Matte White Transmission Distance: 3.5 PLA Polyterra Savanah Yellow Transmission Distance: 3.4This print uses 5 unique filamentsSwap Instructions: Start with Charcoal Black At layer #13 (0.64mm) swap to Scarlett Red At layer #16 (0.76mm) swap to Pink At layer #23 (1.04mm) swap to White At layer #40 (1.72mm) swap to Savanah Yellow for the rest.
Categorie
2D Art
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Beginner Lage betrouwbaarheid
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie