MakerWorld
2D Art
Go to Model
'HellRider' - hueforge - 2 colours
20
Downloads
14
Likes
10
Makes
‘Hellrider’ Inspired - 2 colour hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.72mm and the Actual Thickness is 1.52mm Filaments Used: #000000 PLA Sunlu Matte Black Transmission Distance: 0.1 #ffffff PLA sunlu white Transmission Distance: 6.8 This print uses 2 unique filaments Swap Instructions: Start with Matte Black At layer #10 (0.88mm) swap to white for the rest.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
![The Great Wave [Framed] - Bookmark](https://wsrv.nl/?url=https%3A%2F%2Fmakerworld.bblmw.com%2Fmakerworld%2Fmodel%2FUS1751879ef8551d%2Fdesign%2F2025-03-10_c2a0d197bde07.png&w=400&h=300)
![Tanjiro [Framed] - Demon Slayer Bookmark](https://wsrv.nl/?url=https%3A%2F%2Fmakerworld.bblmw.com%2Fmakerworld%2Fmodel%2FUSdd2525b4899806%2Fdesign%2F2025-05-15_357ec8b5d91af.jpg&w=400&h=300)
