Thingiverse

Helmet door hook

by KedaLin

0 Downloads

0 Likes

0 Makes

This is a door hook that is design for any door 34mm in width. You can rescale it for different doors. This is only for interior doors. Tests show this can support around 10LB. Can fit on any standard bed size (220x220). Simple to print took about 1 hour and 30 minutes to print at 200mm.

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

very large print

Single piece May need scaling or splitting

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 3/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

300 mm (Extra large)

Est. print time

1 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Helmet door hook?

Any FDM printer should handle Helmet door hook just fine. It's been printed on machines like Bambu Lab X1C, Prusa MK4, Creality K1 Max, Anycubic Kobra Max. A minimum build volume of 300 mm is recommended.

How long does it take to print Helmet door hook?

According to the design notes, Helmet door hook takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Helmet door hook available in?

Helmet door hook is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Helmet door hook free to download?

Yes, Helmet door hook is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Helmet door hook

Add to Collection