MakerWorld

Other Miniatures

Helmet Stand (V2)

by Michadr · Other Miniatures

55 Downloads

13 Likes

28 Makes

Version 2 of Helmet Stand. https://makerworld.com/en/models/140818This design has a larger and higher base for larger helmets. Model with all pieces assembled should stand slightly over 13"No glue required, but use at will.

Category

Other Miniatures

Source

MakerWorld

Published

18.01.2024

Updated

30.04.2026

What you need to print this: Advanced Medium confidence

Why?

supports needed · very large print

Supports required May need scaling or splitting

Supports 2/3

Assembly 2/3

Settings 1/3

Bed size 3/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

300 mm (Extra large)

Post-processing

Gluing

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Helmet Stand (V2) ?

Any FDM printer should handle Helmet Stand (V2) just fine. It's been printed on machines like Bambu Lab X1C, Prusa MK4, Creality K1 Max, Anycubic Kobra Max. A minimum build volume of 300 mm is recommended.

Does Helmet Stand (V2) need supports when printing?

Yes, Helmet Stand (V2) will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Helmet Stand (V2) available in?

Helmet Stand (V2) is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Helmet Stand (V2) free to download?

Yes, Helmet Stand (V2) is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Helmet Stand (V2)

Similar Models

Add to Collection