Thingiverse
Helmet Wall Mount
par makeitnerdie
8
Téléchargements
17
Likes
0
Makes
The files are saved in the orientation to print them. The wall mount needs to be printed on an angle to ensure strength.
***IF YOU PRINT THE WALL MOUNT FLAT, IT WILL SNAP!!***
I've had a few fail on me only when it was printed flat. I hold no responsibility if your print fails.
The sections fit a 3/4" PVC pipe in them. Cut the PVC to the lengths that you need them. Secure the pipes with a screw with the provided holes. Add a piece of velcro to the top part and the inside of your helmet to keep it in place.
***IF YOU PRINT THE WALL MOUNT FLAT, IT WILL SNAP!!***
I've had a few fail on me only when it was printed flat. I hold no responsibility if your print fails.
The sections fit a 3/4" PVC pipe in them. Cut the PVC to the lengths that you need them. Secure the pipes with a screw with the provided holes. Add a piece of velcro to the top part and the inside of your helmet to keep it in place.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
