Helping Hands Large base

The base plate measures at 5-3/16" [135 mm] wide x 7-1/2" [188 mm] deep x 1/2" [12] mm thick.

The flexible pipes have a 1/2-20 [M14] thread with an overall length of 11 3/4" [298.45 mm]. I had to make the holes in the pipes larger [13/64" drill bit] in order to slide alligator clips in. The holes in the base are not threaded and are instead friction fitted.

Standard quality print time was 9 hrs 42 minutes with 8 mm brim. Bed plate was kept at 60 degrees to prevent lifting. Nozzle size = 0.4 mm