Hemera 5015 Fan Mount

__WARNING!__ Make sure you are using the latest version of this STL - currently __V4__.

###Fixings:
Mount to Extruder
-----------------------
* 1x M3 x 6mm button head screw - for 3rd mount point (behind the fan) to extruder
* 2x M3 x 6mm screw - for other 2 mount points

5015 Fan
------------
* 2x M3 x 22mm screw
* 2x M3 hex nut
The bottom hex needs to be placed before attaching the mount to the extruder. I'd recommend using the screw to hold it in place during mounting. Once mounted, screw can be removed to place fan in housing - hex nut will stay in place.

Fixed:
-------
- 5015 slot was too narrow - adjusted and uploaded a new version of the STL
- Fan slot was a little snug
- Mounting hole behind fan needs a recess for screw head (lower profile head will need to be used)
- Added a recess for a hex nut on the top hole for the 5015

Print Options:
-----------------
Upright - Supports: Build Plate Only, can leave bottom facing sections of body looking messy
Ti