Hemera - Creator Pro Carriage

Update 22/02/2020 : this mod is working great, many dozens of prints so far, Have used a cable chain to take cables from the head to the back side of the printer. I have only bodged up a makeshift stand to hold the chain to the head assembly, but so far it is working fine, i may design something better in the future.

This is a replacement carriage for the Flashforge Creator Pro
This is still a work in progress! But is currently being used in my machine!
This is a Single Extruder Modification it may or may not work with the factory firmware.
This is working in My machine which has a Duet2 board fitted

18-10-2020 : you may need to reduce the carriage scale by 1% if your carriage binds on the left side of the rails (when sliding it back and forth once clipped onto the bearings)

NOTE: check for binding before you attach the belt as zipping the carriage back and forth with the belt attached will generate current via the stepper motor and may back feed into the control board! (n