Thingiverse
Hemera Ender 3
von TheDanishVapor
1
Downloads
0
Likes
0
Makes
This is my take on a mount for Hemera on Ender 3 (or Creality-machines with the CR-10 mounting plate). I haven't been satisfied with the mounts so far so I decided to make my own.
You will need 9 x M3x8 screws and 4 x M3 nuts.
Assembly instructions will be uploaded soon. But it is pretty straight forward. Rotate it 180 degrees on the Y-axis before printing.
Some minor adjustments will probably be made. But as it is this is mounted on my Ender 3 and works like a charm and you "only" loose 14mm on the Y-axis.
Futher instructions for Marlin will be added ASAP :-)
You will need 9 x M3x8 screws and 4 x M3 nuts.
Assembly instructions will be uploaded soon. But it is pretty straight forward. Rotate it 180 degrees on the Y-axis before printing.
Some minor adjustments will probably be made. But as it is this is mounted on my Ender 3 and works like a charm and you "only" loose 14mm on the Y-axis.
Futher instructions for Marlin will be added ASAP :-)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!