Hemera Mount for Ratrig Vcore2 Pro with BLTouch

STEP files included in case you'd like to modify and remix this.

NOTE: The mount file should be printed upside down. For some reason I can't change this. The part of the mount that eventually sits against the MGN15H carriage should be flat against the bed while printing, and the belt clamp section would be oriented upwards, not downwards as in the picture.

This is a customized mount for installing an E3D Hemera direct drive extruder to the standard Ratrig VCore2 Pro version. It uses 9mm GT2 belts, and the standard MGN15H carriage included in the kit. Requires a Y offset of 24, and an X offset of about 1.

Printing it with PLA will suffer from part creep over time, but it should last for a while. I'm currently in the process of testing it, and you can feel free to print it in PETG/ABS.

You'll need some 2 4x15 dowels (or screws work fine), some M3 bolts (sizes from 8mm to 16mm), along with 6 m3 brass inserts for all the mounting points. 4 inserts are on the belt clamp, 1 is