Thingiverse
Hex angled soap tray
von djtremors
10
Downloads
10
Likes
0
Makes
Seen some trays on the net but decided to practice a little fusion 360 and do my own.
Feet diameter is 4.7mm and hole is 5mm but I still had to file a little in the hole possibly due to first layer squishing making the hole slighly smaller. Your milage may vary and a small tool could edge that out easily and make it a snug fit.
Size: 120mm x 77.5mm x 17mm (with ball stands)
Layer Height: 0.3mm to give the slant a groove step edge which looked cool.
V5 - larger, added chamfer on hexagonal holes and raised sides for those slippery soaps :P
Feet diameter is 4.7mm and hole is 5mm but I still had to file a little in the hole possibly due to first layer squishing making the hole slighly smaller. Your milage may vary and a small tool could edge that out easily and make it a snug fit.
Size: 120mm x 77.5mm x 17mm (with ball stands)
Layer Height: 0.3mm to give the slant a groove step edge which looked cool.
V5 - larger, added chamfer on hexagonal holes and raised sides for those slippery soaps :P
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
