Hexagonal Drawers for uHook Pegboard

Hexagon Drawer Set for Pegboard - uHook edition

Work In Progress The state of this project is as you see it now. I'm satisfied with the quality of the work. But the size could be better. I'm using uHooks and I'd like the hexapods to be flush up against one another. So, a little wider and taller. I'll have time to address this soon but not today. Meanwhile. Definitely works, I just want to tweak it.


Inspired by all the Hex Drawer sets out there. But this one I made from scratch.

I modified the uHook Back I originally used here: https://www.thingiverse.com/thing:5223576. The Case fastens to the Back with one short screw: M3x6mm. The Drawer has 1mm walls & 2mm face with a hex-hole instead of a knob. Case is solid with 2mm walls. Print as shown. I print on Draft with a small 5mm Raft. Don't judge me.

modified 2022-03-05: original drawers were tight. narrowed 'em a bit. Made the hex-hole larger. Thickened the drawer face (to 2mm.) Might further strengthen drawers, but for no