Thingiverse
Hexagonal Hanging Lamp
par manedpup
2
Téléchargements
6
Likes
0
Makes
Designed a lamp cover for a light fixture I found. Will likely fit any standard E26 socket style and may need some adjustments or shims. Includes vents since I run fairly hot Hue bulbs in these fixtures.
Cap and body are PETG, base cover is clear T-Glase. Used default PrusaSlicer settings, printed on 0.6 nozzle on 0.3 QUALITY setting.
I played a bit with using magnets instead of M3 screws for the bottom cover, but it ended up being more work and I really needed the fixtures installed. I also like the look of the M3 screws and used six for symmetry.
Parts List:
10 - M3 heat inserts from McMaster - 94180A331
https://www.mcmaster.com/catalog/94180A331
4 - 20mm M3 screws for the top assembly - 91290A123
https://www.mcmaster.com/catalog/91290A123
6 - 8mm M3 screws from Amazon
Cap and body are PETG, base cover is clear T-Glase. Used default PrusaSlicer settings, printed on 0.6 nozzle on 0.3 QUALITY setting.
I played a bit with using magnets instead of M3 screws for the bottom cover, but it ended up being more work and I really needed the fixtures installed. I also like the look of the M3 screws and used six for symmetry.
Parts List:
10 - M3 heat inserts from McMaster - 94180A331
https://www.mcmaster.com/catalog/94180A331
4 - 20mm M3 screws for the top assembly - 91290A123
https://www.mcmaster.com/catalog/91290A123
6 - 8mm M3 screws from Amazon
manedpup publie également sur
4 modèles supplémentaires sur 1 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
