Thingiverse
Hexagonal Sphericon
21
Download
12
Likes
0
Makes
This is a nice printing and very smooth hexagonal sphericon. The g-code is a 65% model compared to the stl file.
65% is the size on the picture when holding it in my hand.
Just print the half hexagonal twice and glue it together after turning one half in a 60 degree from the other to get this shape.
The g-code is for printing in pla and will take approx. 2 hours per half with a 0.1mm layer height
A short video of it rolling can be found here:
https://www.youtube.com/watch?v=627qkP9qOfA
65% is the size on the picture when holding it in my hand.
Just print the half hexagonal twice and glue it together after turning one half in a 60 degree from the other to get this shape.
The g-code is for printing in pla and will take approx. 2 hours per half with a 0.1mm layer height
A short video of it rolling can be found here:
https://www.youtube.com/watch?v=627qkP9qOfA
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
