Slicer Discord
HexaLeaf - Led Light Panels – 3D-Druckmodell von MakerWorld MakerWorld
Decor

HexaLeaf - Led Light Panels

von MK Expert · Decor
8.1k Downloads
8.3k Likes
2.3k Makes
Zum Modell
Here is my version inspired by NanoLeaf. There are 4 different thicknesses of hexagons to add dimension (25mm/30/35/40). And a textured lid (remember to sand the seam on the hexagon and on the lid before assembling them together). It works very well with colored filaments from the Meta range by Sunlu (except for the black one, of course). The pieces of LED strip are placed at the very top edge of the hexagons. This way, the light diffusion is perfect and the LEDs are not visible through. There are 3 types of supports:Round with 3 holes: placed at the ends (to raise the whole structure),Round without holes: to hold 3 hexagons together,U-shaped: to solidify the structure. The pieces of LED strip are attached inside, at the end that will be near the wall. Printing Instructions:- Hexagon: no infill- Lid: adaptive layersor use 3mf files.
Kategorie
Decor
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
großer Druck
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 2/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Mindest-Druckbett
200 mm (Groß)
Nachbearbeitung
Schleifen
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen