Thingiverse
HexaMicroFly
door reparator
41
Downloads
23
Likes
1
Makes
The answer to all the quadrocopter designs: The HexaMicroFly !!!
This is the video: https://www.youtube.com/watch?v=ZvVWfrv91e8
I like Punkkills Micro 105 FPV Quadrocopter design (http://www.thingiverse.com/thing:1221911) and I wanted to build one. But in Germany you need special frequences for RC flighing which are not covered by the Micro Scisky or the Eachine Flight Controllers with reveiver build-in. So I ordered a SP3Racing Evo with a separate RM receiver from banggood. They send me a SPRacingEvo V2.0 which has outputs for six motors. So I decided to build up a hexacopter. Here is the printable design for it:
What you need:
frame (3D printed): HexaFrame.stl
top (3D printed): TopV2_05.stl or TopV1_04.stl
optional: Flightcontroller Case: FCCase.stl
6x brushed motors 8.5 mm (3x clockwise, 3x counterclockwise)
FrSky Ultra Light XM Receiver Up To 16CH
or
Frsky XM+ Micro D16 SBUS Full Range Receiver Up to 16CH
Micro 32bits F3 Brushed Flight Control Board Base
This is the video: https://www.youtube.com/watch?v=ZvVWfrv91e8
I like Punkkills Micro 105 FPV Quadrocopter design (http://www.thingiverse.com/thing:1221911) and I wanted to build one. But in Germany you need special frequences for RC flighing which are not covered by the Micro Scisky or the Eachine Flight Controllers with reveiver build-in. So I ordered a SP3Racing Evo with a separate RM receiver from banggood. They send me a SPRacingEvo V2.0 which has outputs for six motors. So I decided to build up a hexacopter. Here is the printable design for it:
What you need:
frame (3D printed): HexaFrame.stl
top (3D printed): TopV2_05.stl or TopV1_04.stl
optional: Flightcontroller Case: FCCase.stl
6x brushed motors 8.5 mm (3x clockwise, 3x counterclockwise)
FrSky Ultra Light XM Receiver Up To 16CH
or
Frsky XM+ Micro D16 SBUS Full Range Receiver Up to 16CH
Micro 32bits F3 Brushed Flight Control Board Base
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
