Thingiverse
HexBeam Hub
par du3tw
4
Téléchargements
8
Likes
0
Makes
This is my take on an idea I saw from Sergey Usmanov; He was unwilling to supply STL files, so I thought I would have a go at the design.
This is a center hub for a HexBeam antenna, that is 3-D Printed.
There are 3 types of parts.....
Top plate. I have made this to restrict the poles from rising more than 90 degrees from the horizontal plane. This will create the tension that you want/need.
Lower plate. This is the lower locking mechanism of the hinges.
Hinges. You will need 6 of these, and their diameter will need to be adjusted to the poles that you are planning to use.
Please note: I have not yet tried to print this.
It should give you an idea of how I built the parts, and how I assembled them.
This is a center hub for a HexBeam antenna, that is 3-D Printed.
There are 3 types of parts.....
Top plate. I have made this to restrict the poles from rising more than 90 degrees from the horizontal plane. This will create the tension that you want/need.
Lower plate. This is the lower locking mechanism of the hinges.
Hinges. You will need 6 of these, and their diameter will need to be adjusted to the poles that you are planning to use.
Please note: I have not yet tried to print this.
It should give you an idea of how I built the parts, and how I assembled them.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !