HexBox - Modular storage system

NOTE:This design is also parametrized, meaning that if you want any other size, it is possible. I can publish other sizes as well, or maybe even the FreeCAD files after I am done testing that everything works perfectly.Size:The box is designed to be 40 mm x 40 mm x 80 mm (W x H x L). It has a wall thickness of 2 mm, with tolerances of 0.4 mm, which means it should print fine with any printer. The inside box dimensions are the same, just the dimension - wall thickness * 2 - tolerance * 2.Use / AssemblyPrint the case and the inside box. If you want to connect multiple boxes, print the hexagonal "side connect" (which is a hexagon with a radius 0.1 mm smaller than the holes) and connect it to the side or on the top or bottom of the box. Snap two boxes together, done!You can connect as many boxes as you want, either stacked on top of each other or placed alongside each other. Use multiple connects for better adherence. For a permanent solution, glue can be used. If you are done addi