HexiBox Series: Micro Modular

original model by HexiBase_264072 As seen on X and YouTube:Designed for use with a single 2" Tectonic balanced mode radiator. Suitable between 100Hz - 18kHz. Larger arrays will accommodate frequencies as low as 70Hz. Use reusable adhesive to seal around everything.Tectonic 2" BMR:https://www.parts-express.com/Tectonic-TEBM28C10-4-B-1-1-8-BMR-Full-Range-Speaker-4-Ohm-297-2173Side (coupler) screws - M3 x 6mm:https://www.amazon.com/dp/B08B1T2DCDFront / rear panel screws - M3 x 12mm:https://www.amazon.com/dp/B08B1W1FHSM3 x D5 x L4 Threaded Inserts:https://www.amazon.com/dp/B0CS6VZYL8Hilitchi Binding Posts Terminalshttps://www.amazon.com/gp/product/B07PFMD1N2/Recommended printing settings:PLA is okay; PETG is better.At least 4 perimeters / walls / loops all the way around.At least 20% gyroid infill. (Higher is better.)The Micro Modular is designed for indoor use, as the rear-firing vent relies on a bounce from a nearby wall. (The array can sit upwards of a meter from the vent-facing