HexPlayerPods Dice Rolling Tray
door HexPlayerPods
41
Downloads
18
Likes
0
Makes
A note from the designer: If you choose to print and use this design, please consider tipping me one or two dollars. You can do this via the "Tip Designer" button. Your tips help encourage further development of HexPlayerPods.
Tired of rolled dice tumbling across the board and scattering all of your carefully placed game pieces? This is the pod for you, featuring a 2cm deep tray to keep you rolled dice contained. I recommend lining the inside of this pod with 1mm felt for a quieter, smoother dice rolling experience.
This pod is compatible with all other HexPlayerPods designs.
Like all HexPlayerPods, this pod has holes included along the top, bottom and side walls for small neodymium disc magnets. Each pod uses 24 magnets, and the STL will be designated as either the 3mm or 5mm neodymium magnet design. If you intend to place 1mm felt on the bottom of your HexPlayerPods (to prevent slipping/scratching other surfaces) then I strongly recommend using 5mmx2mm neodymium disc magne
Tired of rolled dice tumbling across the board and scattering all of your carefully placed game pieces? This is the pod for you, featuring a 2cm deep tray to keep you rolled dice contained. I recommend lining the inside of this pod with 1mm felt for a quieter, smoother dice rolling experience.
This pod is compatible with all other HexPlayerPods designs.
Like all HexPlayerPods, this pod has holes included along the top, bottom and side walls for small neodymium disc magnets. Each pod uses 24 magnets, and the STL will be designated as either the 3mm or 5mm neodymium magnet design. If you intend to place 1mm felt on the bottom of your HexPlayerPods (to prevent slipping/scratching other surfaces) then I strongly recommend using 5mmx2mm neodymium disc magne
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!