Thingiverse
HF1965
door rbgodev
9
Downloads
11
Likes
0
Makes
HF1965
A present designed for a lovely couple in occassion of their wedding day back in 1965.
Most of the STLs, except for the letters, are present in this object.
One picture shows the dimensions of the textBar. It is there so you can design your own letters. You make an extruded cut of 1.5mm deep in the back side of the letters using the textBar shape. After post-processing your letters fit over the textBar and with some super glue you finalize the compound text part.
The textBar has a little pivot cylinder ø5mm (in the drawing), and the arrowFrame holes, need to be drilled, broadened until fit. The textBar-pivot has a screw hole of about 2.5mm for a short parker of 3mm thick; choose wisely; not too thick so pivot cracks, and not to long so screw through front side. obviously the head of parker needs to be >ø5mm, else use a washer to achieve this.
All of the parts in the pictures are printed in PETG, except for the foot which is PLA silver.
A present designed for a lovely couple in occassion of their wedding day back in 1965.
Most of the STLs, except for the letters, are present in this object.
One picture shows the dimensions of the textBar. It is there so you can design your own letters. You make an extruded cut of 1.5mm deep in the back side of the letters using the textBar shape. After post-processing your letters fit over the textBar and with some super glue you finalize the compound text part.
The textBar has a little pivot cylinder ø5mm (in the drawing), and the arrowFrame holes, need to be drilled, broadened until fit. The textBar-pivot has a screw hole of about 2.5mm for a short parker of 3mm thick; choose wisely; not too thick so pivot cracks, and not to long so screw through front side. obviously the head of parker needs to be >ø5mm, else use a washer to achieve this.
All of the parts in the pictures are printed in PETG, except for the foot which is PLA silver.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
