HGR15 Linear Rail End Stop

End stop for HGR15 rails. Designed to stop the material support arms from coming off of my Langmuir Systems Titan 25T CNC press brake. Will work on any other HGR15 rails as well. Uses up to 2x brass M3 heat set inserts per end stop for redundancy or situations where you want it more tightly locked onto the rail (for approx 4.2mm diameter and 6mm deep insert). Install inserts from inside part (side that faces the rail) not outside, that will make the inserts much less likely to push out or split the part over time. Original part printed in ABS-GF, but should work in PETG or PLA depending on what filament you have around. Parts needed for each end stop:1 - Printed Part1 or 2 - M3 Brass heat set inserts1 or 2 - M3 set screws 6-10mm long