HiFive Unleashed 1 Case

It's case for this device:
https://www.crowdsupply.com/sifive/hifive-unleashed

Doesn't need any support when printing (you will need rotate the top case by 180 degree), tested with PLA and should be fine with ABS or maybe other materials. All buttons, switches, LEDs and everything needed are easily accessible. While having decent protection (it's not waterproof, or something like that, but should be enough for carrying in your bag). You can screw the board to the top part first (using the PCB holes close to the CPU), then add bottom part of the case which then can be screwed to the default standoffs. Both top and bottom have a small lip which overlaps so the whole case snaps together nicely and keeps both parts from moving around. Sides have pretty big holes so it's easy to use finger to interact with everything and act as wents, so the board will not get hot even after many hours of usage. The intake wents are big enough to pass enough air in (the fan is fairly small and has almos