High-Tech Modern SDCard+MicroSD Case/ Storage/ Box

Really nice , good tolerance SD and MicroSD Card Case. It can store up to 2 each of SD and MicroSD Cards, with a tight snap slide, ensuring no wiggle, and a magnetic lid to stop cards slipping out.Recommendations: Print on carbon fiber 3d effect platePrint red part in photo with .2 nozzle IMPORTANT!Required hardware:4x 5x2mm Neodynium Disk Magnets8x M2x8mm Machine Screw8x M2x4mm Brass Heat Inserts (3.5mm Outer Diameter)M2 Allen Key (Comes with printer)Soldering iron Assembly: Print all partsRemove supportsSuperglue magnets into lid and top part with correct polarityUse the soldering iron on a low heat such as 200-250°C, taking care that they are perfectly straight.Screw the top and base together by inserting and screwing in the bolts.Insert SD and MicroSD cards (may need to push back and forth to loosen)Put lid onEnjoy!