High Tech Windshield Ice Removal System

High Tech Windshield Ice Removal System
=================================

Specs:
---------
* 512MB
* SMD
* High density 4-layer laminate PCB
* Ground edges
* Gold plated

Build instructions:
-----------------------
* PETG on Blue painter’s tape, wiped with alcohol for adhesion.
* Layer height of 0.2652 mm, initial layer height of 0.3 mm
* 4 walls, 0.4 mm nozzle and 6 layers on both top and bottom with concentric pattern
* Gyroid fill at 12%
* First layer speed set to 10 mm/s, subsequent layers at 80 mm/s, wall speed at 60 mm/s
* No supports!!!
* Retraction at 3.5 mm, retraction speed at 25 mm/s
* Outer wall wipe distance 0.2 mm
* Infill overlap percentage 10%
* Infill overlap 0.004 mm
* Skin expand distance 1.6 mm

Or, you know, whatever… it’s all good.

Assembly instructions:
------------------------------
* Print handle
* Stick SIMM in slot, preferably with the non-connector side outward and any surface mount components away from the windshield cont