Highland Cow #2

This is number 2 of a set of 4 Highland Cow Hueforges that I am doing for a friend. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x112.27mm in size You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.6mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Sunlu Orange Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #9 (0.8mm) swap to Orange At layer #12 (1.04mm) swap to White for the rest.