Thingiverse
Hinged Handcuffs | Realistic
von stonemore
1.4k
Downloads
1.5k
Likes
9
Makes
## Printable Hinged Handcuffs
---
These are a clone of the S&W hinged handcuffs from a tracing of a picture online. I was inspired by the many handcuff designs on thingiverse, especially this one: https://www.thingiverse.com/thing:2487050
## Warning
---
If you print these with a high infill, they are really freaking strong. **Don't put them on alone**, the hinge is very restrictive and depending on the key hole direction, you might have trouble getting out. They're almost not a toy.. _ ask me how I know... _
## Features
---
- Double lock
- Printed spring
- Guide groove and boss on the shackle that will keep the shackle from flexing when locked or double locked, giving it really good strength.
- Skin-contact edges are filleted for your comfort
- Bodies and hinge are printed in a single piece without any supports.
- There is a small barrier on the bottom body as well as the top cover to make picking more tricky for the lucky wearer.
- The short version o
---
These are a clone of the S&W hinged handcuffs from a tracing of a picture online. I was inspired by the many handcuff designs on thingiverse, especially this one: https://www.thingiverse.com/thing:2487050
## Warning
---
If you print these with a high infill, they are really freaking strong. **Don't put them on alone**, the hinge is very restrictive and depending on the key hole direction, you might have trouble getting out. They're almost not a toy.. _ ask me how I know... _
## Features
---
- Double lock
- Printed spring
- Guide groove and boss on the shackle that will keep the shackle from flexing when locked or double locked, giving it really good strength.
- Skin-contact edges are filleted for your comfort
- Bodies and hinge are printed in a single piece without any supports.
- There is a small barrier on the bottom body as well as the top cover to make picking more tricky for the lucky wearer.
- The short version o
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
