Hinged shoeholder

This is a hinge to allow for hanging shoes onto flat walls. The two hinges need to be combined with a round 10mm diameter rod of about 230-300mm length, e.g. beech wood rods. For assembly, push the rod into the blind holes of the left and the right hinge, align the hinge arms with a flat surface, and lock rod and arms with a drop of superglue ( cyano acrylate ) The hinges can be attached to the wall either with double-sided tape, or with a screw. The model is print-in-place. After removing the support, the hinge needs to be broken in first, and then lubricated a bit with e.g. silicone oil. I recommend using one pair of hinges per pair of shoes. When a pair of shoes is pulled out, any other shoes will likely drop.