Thingiverse
Hip and Pelvis Model
por DaveMakesStuff
372
Descargas
410
Likes
2
Makes
This display model of the right hemipelvis and femur uses an adjustable ball and socket joint to allow for movement and repositioning of the femoral head in the acetabulum. The model could be used to demonstrate hip replacement prosthesis, or just as an interesting conversation piece!
See here for assembly video: https://youtu.be/LXJVoEX21ZA
The model is supported on the stand using a 6” long section of ¼” square keystock. The keystock inserts through the ischial tuberosity and is held in place with an anchor inside the pelvis. The anchor is designed as a separate shell and so could be removed digitally before printing if not needed.
Printing:
Print the “Acetabular Cup” and “Collar” as provided so that the threads are oriented upwards. Changing the orientation may result in malformed threads. The “Femoral Head” and “Proximal Femur” should also be oriented as provided to ensure that the connecting surfaces print properly with the correct tolerance.
The “Right Hemipelvis
See here for assembly video: https://youtu.be/LXJVoEX21ZA
The model is supported on the stand using a 6” long section of ¼” square keystock. The keystock inserts through the ischial tuberosity and is held in place with an anchor inside the pelvis. The anchor is designed as a separate shell and so could be removed digitally before printing if not needed.
Printing:
Print the “Acetabular Cup” and “Collar” as provided so that the threads are oriented upwards. Changing the orientation may result in malformed threads. The “Femoral Head” and “Proximal Femur” should also be oriented as provided to ensure that the connecting surfaces print properly with the correct tolerance.
The “Right Hemipelvis
DaveMakesStuff también publica en
7 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!