Hisoka Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The Model is 200x200mm in size.You may print at higher layer heights below the Min Depth of 0.48mm.The Max Depth is 3mm and the Actual Depth is 2.2mm. Filaments Used: PLA Elegoo Black Transmission Distance: 0.3 PLA Elegoo Red Transmission Distance: 4 PLA Bambu Lab Pink Transmission Distance: 12 PLA Elegoo White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #13 (1.12mm) swap to Pink At layer #16 (1.36mm) swap to White for the rest.