hitachi naruto hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 153.91x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Blue Transmission Distance: 4 PLA+ Sunlu Red Transmission Distance: 6 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue At layer #10 (0.88mm) swap to Red At layer #14 (1.2mm) swap to WhiteThis slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it.if you want: Border Only Colors from here until the end. At layer #21 (1.76mm) swap to other color