Thingiverse
Hive Thermostat Stand
von xxx949
11
Downloads
10
Likes
1
Makes
A robust one-piece, no-supports stand for a Hive Active Thermostat.
Designed to attach to the Hive Active Thermostat's base plate via 3 M4 pan head bolts (see picture) - 6-10mm long should work fine (I use 12mm in the picture as I happened to have some lying around).
The mounting holes will self-tap an M4 thread with care (screw the bolts in *slowly* - applying a tiny amount of lubricant to the hole beforehand will help with this), but longer bolts with lock nuts can be used for added security.
Feedback very welcome.
Designed to attach to the Hive Active Thermostat's base plate via 3 M4 pan head bolts (see picture) - 6-10mm long should work fine (I use 12mm in the picture as I happened to have some lying around).
The mounting holes will self-tap an M4 thread with care (screw the bolts in *slowly* - applying a tiny amount of lubricant to the hole beforehand will help with this), but longer bolts with lock nuts can be used for added security.
Feedback very welcome.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!