Hobby Machine Vise

A simple machine vise I made with some leftover aluminium extrusion.

**You'll need the same extrusion profile for it to work.**

Part you'll need:
* One printed *Moving_Jaw.stl*
* One printed *Jaw.stl*
* One printed *Fixed_post.stl*
* One printed *Handle.stl*
* At least 270mm 30 "I-type" 60x120mm profile aluminium extrusion. This would give you ~100mm jaw opening. Longer extrusion gives you bigger opening
* 14 **x** M5x35mm socket head screws (DIN912/ISO4762)
* 4 **x** M5 nuts for the aluminium extrusion
* 1 **x** M6X10-28mm countersunk socket head (DIN7991/ISO10642)
* At least 190mm M16 threaded rod (DIN975/ISO whatever), this is for 100mm jaw opening for a bigger opening you'll need a longer one.
* 1 **x** M16 nut (DIN934/ISO4032)