Thingiverse
Hobbyzone Champ UMX EDF bracket
von Johnkit
6
Downloads
6
Likes
0
Makes
I decided to build this after I has been gifted the electronics from an Eflite UMX A-10 Warthog. The airframe is my much loved and repaired Hobbyzone Champ. I put lights and various other things on it and thought it should fly faster and sound better. This fixed both those things.
I printed this in PETG but PLA should be fine.
Position the unit so the back of the bracket is at the CG point. I didn't and have to keep the battery (3S 300mAh) pretty far forward. Test before you glue in place, my plane has lots of glue on it.
The EDF units are secured with dots of hot glue as is the bracket to the body.
I printed this in PETG but PLA should be fine.
Position the unit so the back of the bracket is at the CG point. I didn't and have to keep the battery (3S 300mAh) pretty far forward. Test before you glue in place, my plane has lots of glue on it.
The EDF units are secured with dots of hot glue as is the bracket to the body.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!