Hogwarts Dragon Hueforge

This is a hueforge 100x100mm print that i designed and worked on hueforge. i have been buying magnets from amazon to put these on things like the fridge. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100x100mm in sizeYou may print at higher layer heights below the Min Depth of 0.4mmThe Max Depth is 2.2mm and the Actual Depth is 0.4mmFilaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA PolyLite Red Transmission Distance: 1.5 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 5 unique filamentsSwap Instructions: Start with Charcoal Black At layer #5 (0.48mm) swap to Blue At layer #7 (0.64mm) swap to Jade White At layer #11 (0.96mm) swap to Charcoal Black At layer #12 (1.04mm) swap to Red At layer #15 (1.28mm) swap to Yellow At layer #17 (1.44mm) swap to Jade White for the rest.